多回路快速射出成型机(AD系列)

injectionmoldingmachine10010m50182.jpg

产品编号:

AD-150 250
 

产品名称: 多回路快速射出成型机(AD系列)

产品规格:

本规格资料仅供参考,不做为产品验收之依据,敬请与本公司业务人员联系,确认最适当规格。

项目 系统模式 盖模具 循环时间 日产量(万) 注模机 切割帽机 冷却器 压缩机
Non Neck Finish CAP 16/28N 28mmx16cav. PE:4.5~4.8 PP:5.8~6.2 28.5~30.5 22.0~23.5 AD-150 FS-CB250 250pcs/sec. (BTU) 5 tons Air Pressure 10HP (5~10kg/cm²)
CAP 16/30N 30mmx16cav.
CAP 32/28N 28mmx32cav. PE:6.0~6.5 PP:7.8~8.3 42.5~46.1 33.3~35.4 AD-250 (BTU) 10 tons
CAP 32/30N 30mmx32cav.
CAP 12/38N 38mmx12cav. PE:6.0~6.5 PP:9.0~9.5 15.6~17.0 10.6~11.2 AD-150 (BTU) 5 tons
Neck Finish CAP 16/28K 28mmx16cav. PE:6.5~7.0 PP:8.0~8.5 19.5~21.0 16.0~17.0 AD-150 None (BTU) 5 tons
CAP 16/30K 30mmx16cav.
CAP 32/28K 28mmx32cav. PE:9.5~10.0 PP:11.0~11.5 27.6~29.1 24.0~25.1 AD-250 (BTU) 10 tons
CAP 32/30K 30mmx32cav.
CAP 12/38K 38mmx12cav. PE:9.5~10.0 PP:11.0~11.5 10.0~10.6 8.7~9.1 AD-150 (BTU) 5 tons
CAP 4/48K 48mmx4cav. PE:7.8~8.0 PP:10.5~11.0 4.0~4.3 3.0~3.1 AD-150 (BTU) 5 tons
CAP 4/60K 60mmx4cav. PE:8.5~9.5 PP:11.0~11.5 3.5~4.0 2.9~3.0 AD-150 (BTU) 5 tons

Note 1:N=Non Neck finish,K=Neck Finish
Note 2:The mold includes hot runner and temperature controller.
Note 3: Air conditioner and movable frame are optional items.
Note 4:PE cap works with cool-filling.PP cap works with hot-filling.
Note 5:The daily output counts up 24 hours productions.It is for reference only.
Note 6:Cap cutting system includes transporter belt.

 关于我们

公司名称:

富强鑫机械制造有限公司

主要产品:

螺套及螺杆,卧式注塑成型机,瓶胚注塑成型机

地址:

718台南县关庙乡埤头村保东路269号(广东省东莞市大朗镇石厦管理区)

电话号码:

886-6-5950688 86-769-83313753 86-574-56138688

传真:

886-6-5951120 86-769-83181903 86-574-56138699
 相关产品