Hydraulic Clamp Injection Molding Machine

Hydraulic Clamp Injection Machine

Model No:

MT-MI
 

Products Name: Hydraulic Clamp Injection Molding Machine

Features Specifications:

Control Unit
All major pressure﹑location﹑request etc. can be monitored in the imported MI type high speed precision computer controller with large size color screen. The automation of the whole machine is high and can completely guarantee the request for the stability of your product
All major movement unit equipped with Italy linear transducer and pressure sensors .
Clamping Unit
The use of direct clamping design can make the clamping force be more equal distribution
The use of two times direct hydraulic clamping exhaustion function can reduce the defective products
Hydraulic system equipped with BOSCH large flow and high precision half closed-loop proportional valves from German,special hydraulic circulation and pre-fill oil tank circuit designed ensure low power consumption and high speed operation.
Hydraulic clamping system equipped with pressure sensor achieve high precision half closed loop control. Low-pressure mold protection as well as its mold protection position is extremely short (monitored by half closed loop controls and pressure sensors). Because of precision high pressure position,therefore can save the high-pressure time and also need not the specialist to adjust the mold. You are ease to set the low-pressure mold protection
position in the computer so as to calculate the high pressure point automatically. Clamping position gets extremely high repeating
Injection Unit
Double-cylinders of injection system keep injection combination parallel move. Injection combination adopts save space design and is easy for barrel un-installation
Large torque hydraulic motor keeps
Thimble Unit
Sectional type thimble function may use 0in cool water feed channel mold design thus decrease cast-in slot scrap and reduce cost.
Others
Import electric motor with YUKEN double vane pumps design,prevent from interfere pressure,two units synchronous stably motion.
Magnetic suction filter system ensure hydraulic oil cleanness,if filtration is damaged and block up,vacuum of oil inlet is 0.018Mpa, alarm device will give an alarm.
Equipped with temperature of oil alarm device﹐if the temperature of oil above the Max amount ,the machine will be turn off.

Specification
Specification Model Unit MT50 MT90
INJECTION UNIT Screw Diameter mm Φ22 Φ25 Φ30 Φ35 Φ30 Φ35 Φ40
Theoretical Injection Volume cm³ 46 69 99 135 113 154 201
Injection Weight(PS) g(oz) 43 (1.3) 64 (2.3) 93 (3.3) 126 (4.4) 105 (3.2) 143 (4) 183 (6.6)
Max.Injection Pressure Mpa(kg/cm²) 204 (2385) 286 (3912) 198 (2022) 146 (1485) 283 (3333) 196 (3000) 154 (1568)
Injection Rate cm²/s 70 59 85 115 99 235 176
Injection Speed(Increase the speed) mm/s (30MM 185) 50MM 120 30MM 220 30MM 194 90MM 140
Screw Speed Rotation r.p.m 0-220 0-315
Nozzle Out From Platens mm ≧45 ≧45
CLAMPING UNIT Clamping Force KN(tf) 490(50) 882(90)
Clamping Stroke mm 300 380
Min.Mold Thickness mm 180 180
Max.Opening mm 480 560
Distance Between Tie Bars mm 320*320 380*380
Max.Platens Dimension mm 310*310 370*370
Ejector Distance mm 100 100
Ejector Force KN(tf) 33.5(3.4) 33.5(3.4)
System Pressure Mpa(kg/cm²) 17.2(175) 17.2(175)
OTHERS Oil Tank Capacity L 160 230
Electric Power KW(HP) 11(15) 15(20)
Heater Power kw 5 7.1
Machine Dimensions L*W mm 3390*1005 3830*1100
H mm 1500 1700
Machine Weight tf 3.1 4.1

Specification
Specification Model Unit MT120 MT160 MT220
INJECTION UNIT Screw Diameter mm Φ35 Φ40 Φ45 Φ40 Φ45 Φ50 Φ45 Φ50 Φ55
Theoretical Injection Volume cm³ 154 201 254 276 350 432 382 471 570
Injection Weight(PS) g(oz) 143 (5) 183 (6.6) 256 (6.7) 253 (7) 326 (11.5) 462 (14) 355 (12.5) 418 (15.4) 530 (18.4)
Max.Injection Pressure Mpa(kg/cm²) 254 (2392) 195 (1965) 154 (1588) 245 (2494) 193 (1920) 156 (1996) 244 (2489) 198 (2016) 168 (1688)
Injection Rate cm²/s 125 136 207 157 199 245 207 255 309
Injection Speed(Increase the speed) mm/s 50MM 220 90MM 170 120MM 130 90MM 200 120MM 160 560MM 125 120MM 205 160MM 165 220MM 130
Screw Speed Rotation r.p.m 0-260 0-230 0-220
Nozzle Out From Platens mm ≧45 ≧45 ≧45
CLAMPING UNIT Clamping Force KN(tf) 1176(120) 1568(160) 2156(220)
Clamping Stroke mm 460 600 700
Min.Mold Thickness mm 200 220 240
Max.Opening mm 660 820 940
Distance Between Tie Bars mm 425*425 480*480 530*530
Max.Platens Dimension mm 415*415 470*470 520*520
Ejector Distance mm 120 150 180
Ejector Force KN(tf) 48(4.9) 59(6) 68.6(7)
System Pressure Mpa(kg/cm²) 17.2(175) 17.2(175) 17.2(175)
OTHERS Oil Tank Capacity L 290 400 520
Electric Power KW(HP) 22(30) 22(30) 30(40)
Heater Power kw 7.9 10.5 11.1
Machine Dimensions L*W mm 4348*1136 5090*1364 5683*1459
H mm 1780 1920 2118
Machine Weight tf 5.2 7.2 8.8

Specification
Specification Model Unit MT300 MT430
INJECTION UNIT Screw Diameter mm Φ60 Φ65 Φ70 Φ65 Φ70 Φ75
Theoretical Injection Volume cm³ 848 995 1154 1078 1250 1435
Injection Weight(PS) g(oz) 784 (22.8) 925 (32.6) 1023 (47.5) 1002 (35.3) 1162 (40.9) 1334 (47)
Max.Injection Pressure Mpa(kg/cm²) 194 (2022) 181 (1728) 146 (1486) 197 (2012) 170 (1735) 148 (1512)
Injection Rate cm²/s 395 464 538 464 538 618
Injection Speed(Increase the speed) mm/s 160MM 220 220MM 205 300MM 140 220MM 220 300MM 163 430MM 140
Screw Speed Rotation r.p.m 0-260 0-300
Nozzle Out From Platens mm ≧45 ≧45
CLAMPING UNIT Clamping Force KN(tf) 2490(300) 4214(430)
Clamping Stroke mm 850 950
Min.Mold Thickness mm 280 350
Max.Opening mm 1130 1300
Distance Between Tie Bars mm 660*730 750*980
Max.Platens Dimension mm 700*650 950*700
Ejector Distance mm 180 200
Ejector Force KN(tf) 78.4(8) 122.5(12.5)
System Pressure Mpa(kg/cm²) 17.2(175) 17.2(175)
OTHERS Oil Tank Capacity L 820 930
Electric Power KW(HP) 45(60) 55(75)
Heater Power kw 17.6 17.6
Machine Dimensions L*W mm 6348*1585 7200*1900
H mm 2330 2550
Machine Weight tf 15 19

 Manufacturer Introduce

Supplier:

Multitech Machinery(Shen Zhen)Limited

Main Product:

Vertical/Horizontal Injection Molding Machine

Country:

China

Address:

No.15,The Third Inductrial zone,HouTing Village,Shajing Town,Bao An,Shenzhen

Tel:

(86)755 2722 2911

Fax:

(86)755 2722 2482
 Related Products