Multi-Loop High Speed Injection Molding Machine(AD Series)

Horizontal Injection Machine

Model No:

AD-600 850 1000 1250

Products Name: Multi-Loop High Speed Injection Molding Machine(AD Series)

Features Specifications:

Have multi-loops according to mold conditions and molding requirements. In addition, share screw charge to the movements of opening & closing mold and ejectors move at the same time, thus shorten cycle time.
Under the design of triple loops, the cycle time can achieve within 11 seconds excluding cooling time. According to the testing of produce 2.1kg beach chair by PP material, the cycle time can achieve within 33 seconds if adopting with good mold cooling system. Its top capacity than others.
Drable usage by applying new series toggle system upon finite element analysis (FEA), high strength and weary-resistance to get long life of tie bars and assure quality of products.
All new high rigid structure frame, design upon Finite Element Analysis (FEA) of stress and strain affect. Assure the excellent of frame structure, the AD-1000 was capable of this advantage improvement
Design upon high frame, not necessary to device robot, obtain products from drop outlet, suitable for speedy molding operation.
Apply to shut-off nozzle for injection.
Fcs-2100 microcomputer controller (sampling time reach 1.25ms).
Suitable for large housewares products, for example, beach chair, etc.
The following specifications are for your reference only and can not be used as the machine acceptance criteria.Please contact with our sales representatives to confirm the most appropriate machine features.

Items Unit AD-600 AD-850 AD-1000 AD-1250
Injection Unit
Screw Diameter mm 85 100 105 110
Injection pressure Kgf/cm² 1939 1966 1909 2028
Theoretical Shot Volume cm³ 1950 3533 4284 5129
Shot Weight of Injection(ps) grams 1791 3245 3936 4712
Injection Rate cm³/sec 770 1063 1129 1300
Mould Clamping Unit
Mould Clamping Force metric tons 600 850 1000 1250
Mould Clamping Stroke mm 990 1000 1100 1275
Mould Thickness mm 300-1100 350-1200 400-1300 450-1400
Suggested Min Mold Dim(HxV) mm 560x560 625x625 690x690 790x790
Distance Between Tie Bars mm 860x860 960x960 1060x1060 1260x1210
Mould platen mm 1290x1290 1460x1460 1600x1600 1740x1740
Ejector Stroke mm 220 240 300 320
Electrical Equipment
Pump Driving Motor HP(kw) 140(104.4) 180(138) 200(149.2) 225(167.85)
Temperature Controller (range)set (0-400℃)x7 (0-400℃)x7 (0-400℃)x7 (0-400℃)x8
Heater Capacity KW 49.3 59 65.16 78
Machine Dimension(LxWxH) mm 8500x2200x3100 13000x2300x2700 14000x2400x2800 14500x2600x3400
Pump Pressure kgf/cm² 140 140 140 140

1.The shot weight is based on polystyene at specific gravity of 1.25.
2.The features are for your reference only.Due to continuous improvements, we reserve the right to amend any of the above specifications without prior notice. Please contact with our service center to get the newest information.

 Manufacturer Introduce



Main Product:

Toggle Type Injection Molding Machine,Direct Hydraulic Clamp Injection Molding Machine,Horizontal Injection Molding Machine,Thermoset Injection Molding Machine,Two-color Injection Molding Machine,Multi-color Injection Molding Machine,Preform Injection Mol




No.121 Bay Tow,Bay-Tow Village,Kwang-Meow Hsiang,Tainan County,Taiwan.(Shixia Administration District,Dalang Town,Dongguan City,Guangdong Province,China.)


886-6-5950688 86-769-83313753 86-574-56138688


886-6-5951120 86-769-83181903 86-574-56138699
 Related Products