PET Plastic Injection Machine

Preform Injection Machine

Model No:

ALL268
 

Products Name: PET Plastic Injection Machine

Features Specifications:

PET perform plastic injection machine
PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.
1.Special injection construction designed to benefit for plasticizing.
2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
4. Microprocessor controller with 4 stages injection, 3 stages holding pressure.
5. Shut-down memory is able to store up to 100 preset mold data memory.
6.Higher stability and lower defect in PET preform dimension

SPECIFICATION UNIT ALL268
INJECTION UNIT    
screw diameter mm 60
screw l/d ratio L/D 25
shot volume(theoretical) cm 707
shot weight g 636
injection pressure mpa 142
injection speed mm/s 91
screw speed rpm 0-180
CLAMPING UNIT    
clamping force KN 2680
toggle stroke mm 540
space between tie bars mm 570x570
max.mould height mm 600
min.mould height mm 220
ejector stroke mm 130
ejector force KN 62
ejector number PG 9
OTHERS    
max.pump pressure Mpa 16
pump motor power KW 22
heater power KW 17
machine dimension(LxWxH) m 6.09x1.41x2.34
oil tank capacity L 315
machine weight Ton 9

 Manufacturer Introduce

Supplier:

NINGBO AOLI MACHINERY CO.,LTD.

Main Product:

Horizontal Injection Molding Machine,PET Stretch Blow Molding Machine

Country:

China

Address:

No.168 Jiangnan Road,South Side of Huaxin Storage,Ningbo City,Zhejiang Province,China.

Tel:

86-574-87900558

Fax:

86-574-87900676
 Related Products