PET Plastic Injection Machine
Products Name: PET Plastic Injection Machine
Features Specifications:
PET perform plastic injection machine
PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.
1.Special injection construction designed to benefit for plasticizing.
2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
4. Microprocessor controller with 4 stages injection, 3 stages holding pressure.
5. Shut-down memory is able to store up to 100 preset mold data memory.
6.Higher stability and lower defect in PET preform dimension
SPECIFICATION | UNIT | ALL168 |
INJECTION UNIT | ||
screw diameter | mm | 48 |
screw l/d ratio | L/D | 25 |
shot volume(theoretical) | cm | 389 |
shot weight | g | 350 |
injection pressure | mpa | 140 |
injection speed | mm/s | 114 |
screw speed | rpm | 0-180 |
CLAMPING UNIT | ||
clamping force | KN | 1680 |
toggle stroke | mm | 425 |
space between tie bars | mm | 465x465 |
max.mould height | mm | 480 |
min.mould height | mm | 180 |
ejector stroke | mm | 130 |
ejector force | KN | 39.6 |
ejector number | PG | 5 |
OTHERS | ||
max.pump pressure | Mpa | 16 |
pump motor power | KW | 16 |
heater power | KW | 11.2 |
machine dimension(LxWxH) | m | 5.18x1.21x2.22 |
oil tank capacity | L | 200 |
machine weight | Ton | 5.5 |

Supplier: |
NINGBO AOLI MACHINERY CO.,LTD. |
Main Product: |
Horizontal Injection Molding Machine,PET Stretch Blow Molding Machine |
Country: |
China |
Address: |
No.168 Jiangnan Road,South Side of Huaxin Storage,Ningbo City,Zhejiang Province,China. |
Tel: |
86-574-87900558 |
Fax: |
86-574-87900676 |