PET Plastic Injection Machine

Preform Injection Machine

Model No:

ALL368
 

Products Name: PET Plastic Injection Machine

Features Specifications:

PET perform plastic injection machine
PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.
1.Special injection construction designed to benefit for plasticizing.
2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
4. Microprocessor controller with 4 stages injection, 3 stages holding pressure.
5. Shut-down memory is able to store up to 100 preset mold data memory.
6.Higher stability and lower defect in PET preform dimension

SPECIFICATION UNIT ALL368
INJECTION UNIT    
screw diameter mm 75
screw l/d ratio L/D 25
shot volume(theoretical) cm 1457
shot weight g 1325
injection pressure mpa 156
injection speed mm/s 92
screw speed rpm 0-180
CLAMPING UNIT    
clamping force KN 3680
toggle stroke mm 700
space between tie bars mm 725x705
max.mould height mm 750
min.mould height mm 250
ejector stroke mm 160
ejector force KN 110
ejector number PG 13
OTHERS    
max.pump pressure Mpa 16
pump motor power KW 37
heater power KW 22
machine dimension(LxWxH) m 7.53x1.87x2.57
oil tank capacity L 650
machine weight Ton 15

 Manufacturer Introduce

Supplier:

NINGBO AOLI MACHINERY CO.,LTD.

Main Product:

Horizontal Injection Molding Machine,PET Stretch Blow Molding Machine

Country:

China

Address:

No.168 Jiangnan Road,South Side of Huaxin Storage,Ningbo City,Zhejiang Province,China.

Tel:

86-574-87900558

Fax:

86-574-87900676
 Related Products