Dual Color Injection Molding Machine

Single/Dual color Injection Machine

Model No:

DC
 

Products Name: Dual Color Injection Molding Machine

Features Specifications:

Microcomputer controller provides accuracy, precision, stability and fast reaction. System memory can store up to 120 sets of molding parameters. Auto diagnostic monitor system can detect malfunction immediately to shorter the troubleshooting time.
Microcomputer control system provides multi-step injection control with adjustable pressure/speed and multi-step holding pressure to meet most complicated molding requirements.
Special mechanism design of the toggle has smooth and stable movement. Low-pressure protection system could is utilized to prevent unintended damage of the mold. Toggle pins and bushings are adopted by special alloy steel, and auto lubrication system could extend the toggle life greatly.
New generational toggle mechanism possess following characteristic as high strength, good flexibility, length of machine shorter and much longer clamping stroke than traditional toggle machines, and so on.
Lumped hydraulic circuit reduces power lose and noise. Exposed hydraulic circuit makes maintenance easier.
Injection unit adopt patent vertical double injection cylinder mechanism which easy to repair and have good functions.
HWA CHIN machine parts are machined by imported Japanese machining equipment, and rigorously inspected by 3D measuring device to ensure superior quality and accuracy.
Through 30 years improvement and upgrade, specification, construction strength and functions absolutely satisfy customers requirement.

SYSTEM   DC-160 DC-210
Items Clamping Force 160 210
Injection
System
Screw Diameter unit Front Inj Rear Inj Front Inj Rear Inj
mm 28 32 38 28 32 38 28 32 38 28 32 38
Injection Pressure kg/cm2 2665 2044 1450 2665 2044 1450 2665 2044 1450 2665 2044 1450
Theoretical Shot Volumn cm3 109 142 200 109 142 200 109 142 200 109 142 200
Shot Weight g 98 127 180 98 127 180 98 127 180 98 127 180
oz 3.5 4.5 6.3 3.5 4.5 6.3 3.5 4.5 6.3 3.5 4.5 6.3
Injection Rate cm3 62 81 114 62 81 114 62 81 114 62 81 114
Screw Revolving Speed rpm 228 228 228 228
Clamping
System
Clamping Stroke mm 425 460
Space Between Tie Bar (H x V) mm 460x450 510x500
Mold Platen Dimensions (H x V) mm 660x660 735x735
Range of Mold Height mm 95-445 95-495
Hydraulic Ejection Stroke mm 110 130
Electrical
System
Pump Motor kw 22 22
Heater Capacity kw 5.8 5.8 5.8 5.8
Pump Pressure (Max.) kg/cm2 140 140
Machine
Dimension
Machine Dimension
(L x W x H)
m 4.5x1.2x2.0 4.9x1.4x2.1
Net Weight ton 5.5 6.8

SYSTEM   DC-250 DC-300
Items Clamping Force 250 300
Injection
System
Screw Diameter unit Front Inj Rear Inj Front Inj Rear Inj
mm 38 42 48 38 42 48 38 42 48 38 42 48
Injection Pressure kg/cm2 1755 1440 1100 1755 1440 1100 1755 1440 1100 1755 1440 1100
Theoretical Shot Volumn cm3 226 276 361 226 276 361 226 276 361 226 276 361
Shot Weight g 204 248 325 204 248 325 204 248 325 204 248 325
oz 7.2 8.7 11.4 7.2 8.7 11.4 7.2 8.7 11.4 7.2 8.7 11.4
Injection Rate cm3 167 204 266 167 204 266 167 204 266 167 204 266
Screw Revolving Speed rpm 300 300 300 300
Clamping
System
Clamping Stroke mm 500 550
Space Between Tie Bar (H x V) mm 560x550 610x600
Mold Platen Dimensions (H x V) mm 810x810 880x880
Range of Mold Height mm 120-540 100-590
Hydraulic Ejection Stroke mm 150 150
Electrical
System
Pump Motor kw 37 37
Heater Capacity kw 7.5 7.5 7.5 7.5
Pump Pressure (Max.) kg/cm2 140 140
Machine
Dimension
Machine Dimension
(L x W x H)
m 5.4x1.5x2.2 6.1x1.6x2.2
Net Weight ton 8.5 10.5

SYSTEM   DC-350 DC-400
Items Clamping Force 350 400
Injection
System
Screw Diameter unit Front Inj Rear Inj Front Inj Rear Inj
mm 38 42 48 42 48 55 38 42 48 42 48 55
Injection Pressure kg/cm2 1755 1440 1100 1905 1460 1100 1755 1440 1100 1905 1460 1100
Theoretical Shot Volumn cm3 226 276 361 276 361 474 226 276 361 276 361 474
Shot Weight g 204 248 325 248 325 426 204 248 325 248 325 426
oz 7.2 8.7 11.4 8.7 11.4 14.0 7.2 8.7 11.4 8.7 11.4 14.0
Injection Rate cm3 167 204 266 220 287 377 167 204 266 220 287 377
Screw Revolving Speed rpm 300 280 300 280
Clamping
System
Clamping Stroke mm 600 650
Space Between Tie Bar (H x V) mm 655x650 705x700
Mold Platen Dimensions (H x V) mm 960x960 1035x1035
Range of Mold Height mm 115-635 130-680
Hydraulic Ejection Stroke mm 180 180
Electrical
System
Pump Motor kw 45 45
Heater Capacity kw 7.5 9.3 7.5 9.3
Pump Pressure (Max.) kg/cm2 140 140
Machine
Dimension
Machine Dimension
(L x W x H)
m 6.4x1.7x2.3 7.0x1.8x2.3
Net Weight ton 12 16

SYSTEM   DC-450 DC-600
Items Clamping Force 450 600
Injection
System
Screw Diameter unit Front Inj Rear Inj Front Inj Rear Inj
mm 38 42 48 42 48 55 48 55 60 48 55 60
Injection Pressure kg/cm2 1755 1440 1100 1905 1460 1100 1945 1481 1244 1945 1481 1244
Theoretical Shot Volumn cm3 226 276 361 276 361 474 425 558 664 425 558 664
Shot Weight g 204 248 325 248 325 426 382 502 597 382 502 597
oz 7.2 8.7 11.4 8.7 11.4 14.0 13.4 17.7 21.0 13.4 17.7 21.0
Injection Rate cm3 167 204 266 220 287 377 207 272 324 207 272 324
Screw Revolving Speed rpm 300 280 216 216
Clamping
System
Clamping Stroke mm 700 740
Space Between Tie Bar (H x V) mm 780x780 880x880
Mold Platen Dimensions (H x V) mm 1160x1160 1300x1300
Range of Mold Height mm 180-800 205-950
Hydraulic Ejection Stroke mm 180 300
Electrical
System
Pump Motor kw 45 30 + 30
Heater Capacity kw 7.5 9.3 11.2 11.2
Pump Pressure (Max.) kg/cm2 140 140
Machine
Dimension
Machine Dimension
(L x W x H)
m 7.8x1.9x2.3 8.8x2.1x2.4
Net Weight ton 23 30

SYSTEM   DC-800 DC-1060
Items Clamping Force 800 1060
Injection
System
Screw Diameter unit Front Inj Rear Inj Front Inj Rear Inj
mm 55 60 65 55 60 65 55 60 65 70 75 80
Injection Pressure kg/cm2 1629 1360 1160 1629 1360 1160 1629 1360 1160 1823 1588 1395
Theoretical Shot Volumn cm3 617 734 861 617 734 861 617 734 861 1539 1767 2010
Shot Weight g 555 660 775 555 660 775 555 660 775 1385 1590 1809
oz 19.5 23.2 27.3 19.5 23.2 27.3 19.5 23.2 27.3 48.8 56.0 63.7
Injection Rate cm3 345 410 481 345 410 481 345 410 481 367 421 480
Screw Revolving Speed rpm 201 201 201 118
Clamping
System
Clamping Stroke mm 1050 1250
Space Between Tie Bar (H x V) mm 1005x1000 1120x1120
Mold Platen Dimensions (H x V) mm 1470x1470 1630x1630
Range of Mold Height mm 200-1000 200-1100
Hydraulic Ejection Stroke mm 300 300
Electrical
System
Pump Motor kw 37 + 37 37+55
Heater Capacity kw 12.5 12.5 12.5 27.4
Pump Pressure (Max.) kg/cm2 140 140
Machine
Dimension
Machine Dimension
(L x W x H)
m 10x2.3x2.3 11.2x2.5x2.4
Net Weight ton 47.5 60

  1. Shot weight for polystrene. (Cross section area of screw x Injection stroke) x (Injection efficiency.)
  2. Specification subject to change without notice on this catalog.

OPTIONAL EQUIPMENT
SPARE AND ATTACHED PARTS STANDARD EQUIPMENT
  1. ROTATION AXLE DEVICE
  2. CLOSED LOOP INJECTION SYSTEM
  3. ACCUMULATOR WITH CLOSED LOOP INJECTION SYSTEM
  4. HOPPER DRYER
  5. AUTO LOADER
  6. BIMETALLIC BARREL
  7. DATA LOCK FUNCTION
TOOLS BOX 1 PC
"L" SHAPE WRENCH 1 SET
14mm "L" SHAPE WRENCH 1 PC
23 x 26 DOUBLE ENDED WRENCH 1 PC
  1. POTATION PLATEN DEVICE
  2. HYDRAULIC EJECTOR DEVICE
  3. CORE PULL CONTROL
  4. AUTO MOLD-THICKNESS ADJUSTMENT
  5. ELECTRIC SAFETR DEVICE
  6. AIR EJECTOR DEVICE
  7. WATER DISTRIBUTOR
  8. AUTO LUBRICATION DEVICE
  9. VIBRATION ABSORBING MOUNTS

 Manufacturer Introduce

Supplier:

HWA CHIN MACHINERY FACTORY CO.,LTD.

Main Product:

Horizontal Injection Molding Machine,Two-color Injection Molding Machine,Thermoset Injection Molding Machine,Direct Hydraulic Clamp Injection Molding Machine

Country:

Taiwan

Address:

238,CHUNG CHENG S.RD.YUNG KANG CITY,TAINAN HSIEN TAIWAN

Tel:

886-6-2533636

Fax:

886-6-2533636