|
| Features Specifications: |
Clamping force comes from the three hydraulic cylinders (triangle position); clamping force is steadfast and even on the mould, this is the base factor for VCD/CD molding;
Movable platen is assistant by the linear parallel rail to ensure the exact parallel moving between the two clamping platen;
The screw L/D ratio is up to 26:1 and both the clamping unit and injection unit adopt servo valve (MOOG of U.S.A)
Nitrogen speed accumulator is settled on the injection unit to accelerate the injection speed;
The control computer is B&R of Austria, and adopts PID temperature control;
The material for the CD/VCD disc is PC (15g) and the injection period is 4s (900pcs/h output); the material is recyclable;
| Product parameter list： |
Clamping unit |
|
(Clamping force) |
500KN |
(Mould open stroke) |
230 mm |
(Mould height min) |
170 mm |
(Max daylight) |
400 mm |
(Distance between tie rods) |
310X260 mm |
(Injection Unit) |
|
(Screw diameter) |
28 mm |
(Screw L/D ratio) |
26:1 |
(Shot volume) |
49 cm |
(Shot weight PC) |
50g |
(Injection pressure) |
210 MPa |
(Injection rate) |
188 g/s |
(Plasticizing capacity) |
17 g/s |
(Screw speed) |
0-380 rpm |
(General) |
|
(Machine dimensions) |
3.63x1.22x2.13m |
|
|
|
