Servo-Driven Two-Platen Injection Moulding Machine

Energy Saving Injection Molding Machine

Model No:

900-4000JSe

Products Name: Servo-Driven Two-Platen Injection Moulding Machine

Features Specifications:

Outstanding performance:
Energy saving by over 50% as comparing with traditional fixed displacement pump system
Direct clamping mechanism with high revolution pressure transducer, ensures the accuracy of clamping force
Super large tie bar distance and mould thickness range
AC servo motor achieves machine stability under low-velocity
High product weight repeatability, even under the condition of low-velocity and long holding-pressure time
Regenerative circuit on injection can effective enhance injection repeatability and boost up injection speed
Original European closed loop controller specified for injection moulding machine

ITEM UNIT TTI-190Se TTI-260Se TTI-320Se
Screw diameter mm 45 50 55 20 55 60 55 60 65
Thxorcticalshut volume cm3 366 452 546 497 601 715 656 780 916
Shot weight(PS) g 329 406 492 447 541 644 590 702 824
Shot weight(PS) oz 11.6 14.4 17.4 15.8 19.1 22.7 20.9 24.8 29.1
Length/Diameter ratio L/D 22.5 20.2 18.4 22.2 20 18.3 21.9 20 18.4
Injection pressure Mpa 223 181 149 218 180 151 212 179 152
Injection rate cm3/sec 142 175 212 211 255 304 248 295 346
Injection stroke mm 230 253 276
Max.screw speed rpm 145 190 175
Plasticizing capacity(PS) kg/hr 62.2 82.3 106.2 123.9 170.5 202.8 134.5 185.1 170.5
Injection unit force Ton 5.3 8.3 8.3
Carriage stroke mm 360 400 435
Clamping force Ton 190 260 320
Max.daylight mm 1000 1105 1250
Clamping stroke mm 490 525 590
Distance between tie bars mm 510*510 580*580 660*660
Min.mould dimension mm 350*350 400*400 460*460
Mould thickness range mm 175-510 200-580 250-660
Ejector force Ton 4.5 6.1 6.1
Ejector stroke mm 140 160 180
No.of ejector pins unit 5 9 13
Max.motor current A 63 72 85
System pressure Mpa 17 17 17
No.of heater zones unit 4+1 5+1 5+1
Heater input power kW 13.22 15.42 16.42
Net weight Ton 66 8.2 10.8
Oil filling capacity L 250 380 460

ITEM UNIT TTI-190Se TTI-260Se TTI-320Se
Screw diameter mm 45 50 55 20 55 60 55 60 65
Thxorcticalshut volume cm3 366 452 546 497 601 715 656 780 916
Shot weight(PS) g 329 406 492 447 541 644 590 702 824
Shot weight(PS) oz 11.6 14.4 17.4 15.8 19.1 22.7 20.9 24.8 29.1
Length/Diameter ratio L/D 22.5 20.2 18.4 22.2 20 18.3 21.9 20 18.4
Injection pressure Mpa 223 181 149 218 180 151 212 179 152
Injection rate cm3/sec 142 175 212 211 255 304 248 295 346
Injection stroke mm 230 253 276
Max.screw speed rpm 145 190 175
Plasticizing capacity(PS) kg/hr 62.2 82.3 106.2 123.9 170.5 202.8 134.5 185.1 170.5
Injection unit force Ton 5.3 8.3 8.3
Carriage stroke mm 360 400 435
Clamping force Ton 190 260 320
Max.daylight mm 1000 1105 1250
Clamping stroke mm 490 525 590
Distance between tie bars mm 510*510 580*580 660*660
Min.mould dimension mm 350*350 400*400 460*460
Mould thickness range mm 175-510 200-580 250-660
Ejector force Ton 4.5 6.1 6.1
Ejector stroke mm 140 160 180
No.of ejector pins unit 5 9 13
Max.motor current A 63 72 85
System pressure Mpa 17 17 17
No.of heater zones unit 4+1 5+1 5+1
Heater input power kW 13.22 15.42 16.42
Net weight Ton 66 8.2 10.8
Oil filling capacity L 250 380 460

ITEM UNIT TTI-600Se TTI-750Se
Screw diameter mm
Thxorcticalshut volume cm3 2071 2621 3236 2863 3534 4277
Shot weight(PS) g 1864 2359 2912 2577 3181 3849
Shot weight(PS) oz 65.9 83.4 102.9 91 112 136
Length/Diameter ratio L/D 23 20.7 18.3 23 21 18.9
Injection pressure Mpa 226 179 145 199 161 133
Injection rate cm3/sec 406 514 635 590 729 882
Injection stroke mm 412 450
Max.screw speed rpm 140 125
Plasticizing capacity(PS) kg/hr 262.1 340.1 409.6 286 344 442
Injection unit force Ton 18.3 18
Carriage stroke mm 600 600
Clamping force Ton 600 750
Max.daylight mm 1820 2050
Clamping stroke mm 910 1050
Distance between tie bars mm 900*900 1000*1000
Min.mould dimension mm 630*630 700*700
Mould thickness range mm 350-910 350-1025
Ejector force Ton 12.5 25
Ejector stroke mm 300 350
No.of ejector pins unit 17 17
Max.motor current A 120 130
System pressure Mpa 5+1 16
No.of heater zones unit 30.59 5+1
Heater input power kW 26 34
Net weight Ton 820 45
Oil filling capacity L 820 1150

ITEM UNIT TTI-380Se TTI-450Se TTI-500Se
Screw diameter mm 60 70 80 70 80 90 70 80 94
Thxorcticalshut volume cm3 910 1239 1619 1416 1850 2341 1486 1940 2679
Shot weight(PS) g 819 1115 1457 1275 1665 2107 1337 1746 2411
Shot weight(PS) oz 29 39.4 51.5 45 58.8 74.5 47 62 85
Length/Diameter ratio L/D 23.5 20.1 17.6 24.1 21 18.6 24 21 18
Injection pressure Mpa 246 180 138 221 169 134 220 168 121
Injection rate cm3/sec 258 352 459 361 471 597 359 469 647
Injection stroke mm 322 368 386
Max.screw speed rpm 150 175 175
Plasticizing capacity(PS) kg/hr 146.1 215 280.9 250.9 327.7 425.1 257.2 335.9 463.7
Injection unit force Ton 11 11 11.9
Carriage stroke mm 435 480 500
Clamping force Ton 380 450 500
Max.daylight mm 1450 1560 1640
Clamping stroke mm 710 740 820
Distance between tie bars mm 740*740 780*780 825*825
Min.mould dimension mm 510*510 540*540 570*570
Mould thickness range mm 250-740 300-820 300-820
Ejector force Ton 10.2 12.3 13
Ejector stroke mm 200 250 250
No.of ejector pins unit 13 13 13
Max.motor current A 100 110 110
System pressure Mpa 17 17 17
No.of heater zones unit 5+1 5+1 5+1
Heater input power kW 21.59 24.64 25.79
Net weight Ton 14.4 17 17
Oil filling capacity L 560 710 110

Standard configuration

Injection Unit
Standard nitrided screw
Inhection stroke controlled by non-contact absolute positiion transducer
Movable hopper(90-190Se)
Fixed hopper(260-750Se)
Barrel protection cover
Injection/holding/plasticizing setting
Screw xold start-up prevention
Heat/holding temperature swtich over
Drooling prevention
Automatic purging
Automatic detection of injection failure
Clamping Unit
High pressure centralized lubrication system
Clamping stroke controlled by non-contact absolute position transducer
Ejector stroke controlled by non-contact absolute position transducer
Safety device(mechanical/electrical)
Core pull operating mode
Ejector model selection(4option)
High speed clamping function
Auto-mould height adjustment
Hydraulic Unit
Pressure/flow rate closed-loop controlled
Adjustable back-pressure control
Y-strainer for cooling water
Special purpose servo-motor,pump and drive
High performance precision filter
Contorl Unit
DE020 control (90-260Se)
B&R control system(320-750Se)
Color TFT LCD
Multi-language display
Temperature controlled by proccessor(with PID control)
Contactor for heating control
Data locking function
Max.speed limited function
Fault display
Production counter

Optional Items

Extended nozzle
Spring shut-off nozzle
Hydraulic shut-off nozzle
Static mixer for color mixing
Bi-metallic screw and barrel
Closed-loop injection
Accumulator for high speed injection
Proportional back-pressure
Induction heater
Oil temperature control(Temperature controller)
Core pulling device
Unscrewing device
Air blast device
Increase mould height capacity
Hydraulic safety interlock
Lubrication retum line filtration system
Retum line filtration system
Automatic safety door
Robot interface
Autoloader
Hopper dryer
Gas assist injection device

Servo-Driven Two-Platen Injection Moulding Machine

 Manufacturer Introduce

Supplier:

 Related Products