2-Color Plastic Injection Molding Machine

Products Name: 2-Color Plastic Injection Molding Machine

• Made from the heat-resistant Teflon, the pipe can use for cooling water or mould warmer.
• The device prevents the pipe from rotating with mould as it is directly assembled into the mould through the turntable.

• The device uses the turntable to rotate the move mould.
• It can make the turntable rotate the core block only.

• The special operation panel is humanized.
• It is easy to operate and understand.
• The run and process can be seen clearly.

• The design, adopting the individually independent logically hydraulic circuit system along with hydraulic servo control, makes the forming much more precise and accurate.

• It transmits the rolling shaft by up-down, active and driven parallel racks.
• The system rotates fast and smoothly.
• Additionally, both left-right orientation system and hydraulic deceleration system make orientation accurate and never result in displacement due to the wear of the gear.

• All 2 sets of injection systems, 2 sets of mould ejecting systems and mould clamping system are controlled by German NOVO potentiometer.
• The servo hydraulic valve, controlled by microcomputer, detects pressure and makes the fine forming much more stable.
• 2 sets of additional pressure ratio systems, keeping independent digital back-pressure under control, make plasticizing density from the screw much more stable.

• The colors are clear and none complex at all.
• The high-plasticizing from the screw promotes the density of the melted plastic.
• Double-colored cover makes no peeling or separation.

  Models		AT-200R						AT-250R						AT-300R
  Injection unit		A(F)			B(R)			A(F)			B(R)			A(F)			B(R)
  Screw Diameter	mm	28	32	36	28	32	36	36	40	45	36	40	45	36	40	45	36	40	40
  Injection Pressure	kg/cm2	2995	2293	1812	2995	2293	1812	2203	1785	1414	2203	178	1414	2203	1785	1414	2203	1785	1414
  Theoretical Shot Colune	cm3	110	144	183	110	144	183	203	251	318	203	251	318	203	251	318	203	251	318
  Shot Weight	g	98	128	163	98	128	163	181	224	283	181	224	283	181	225	283	181	225	283
  	oz	3.5	4.5	5.7	3.5	4.5	5.7	6.4	7.9	10	6.4	7.9	10	6.4	6.4	10	6.4	6.4	10
  Injection Rate	cm3/sec	68	89	113	28	89	113	103	128	161	103	128	161	114	140	178	114	140	178
  Screw Revolving	rpm	280			280			245			245			270			270
  Clamping Unit
  Clamping Stroke	mm	480						550						620
  Space between Tie Bar (HxV)	mm	510x510						560x560						610x610
  Mold Platen Dimension (HxV)	mm	780x780						840x840						920x920
  Range of Mold Height	mm	120-520						120-580						150-650
  Hydraulic Ejector Stroke	mm	130						150						150
  Electrical Unit
  Pump Motor	hp(kw)	40(30)						50(37)						60(45)
  Heater Capacity	kw	10.4						10.4						13
  Pump Pressure(Max)	kg/cm2	140						140						140
  Machine Dimension
  Machine Dimension (LxWxH)	M	6.1x 1.4x 1.8						6.8x 1.5x 2.0						7.3x 1.6x 2.0
  Net Weight	ton	11						14						17
  Packing Dimension	M	6.5x 1.8x 2.5						7.2x 1.9x 2.7						7.7x 2.0x 2.7
  Cross Weight	ton	11.5						14.5						18