Vertical Clamping Vertical Injection

Vertical Injection Molding Machine

Model No:

YH-160

Products Name: Vertical Clamping Vertical Injection

Features Specifications:

Specification:

INJETCION UNIT
  V 1S 2S VR
Screw Diameter mm
40 45 50
Injection Pressure kgf/cm2
2204 1742 1411
Injection Capacity cm3
251 318 393
Max. Injection Weight(P.S) gr
228 289 357
oz
8.0 10.2 12.6
Injection Rate cm3/sec
96 122 151
Screw Rotation Speed r.p.m 0~180
Drive Motor kw (hp) 18.7(25) 18.7(25) 22.4(30) 22.4(30)
Heater kw 11
Cooling Water l/hr 1600~1800
CLAMPING UNIT
Clamping Force tf 160
Clamping Stroke mm 300
Max. Open Distance mm 550
Min. Mould Height mm 250
Dimension of inner Post
(H x V)
mm 650 x 420
Hydraulic Ejectior Force tf 3.5
Ejector Stroke mm 80 125 125 125
SLIPFORM UNIT(1S/2S)
Slidable Journey mm 600 650
Overall Size of Slipform (H x V) mm 630 x 680 630 x 1330
ROTARY UNIT(VR)
Rotary Table Diameter mm Ø1356
The Max Mold Size mm 450 x 450
400 x 550
OTHER
Oil Tank Capacity L 350
Dimension of Machine
(L x W x H)
L(m) 2.1 2.6 2.0 2.9
W(m) 1.6 1.6 2.4 1.9
H(m) 4.4 4.7 4.7 4.5
Weight of Machine T 6.2 6.4 7.0 7.7

Figures shoen herein are subject to changs without notice.
Screw and clamping force can be design as customers request.
Features

YH-V
Vertical four-column/vertical clamping pressure, vertical injection, plastic injection molding machine of a high-speed molds.Specially designed for plastic models, high injection pressure, fast speed, a model that is the best choice for thin-piece molding. It is also applicable to various types of insert injection molding, excellent in molding capacity.
Big L / D ratio of screw, more suitable for special engineering plastics.
Computer programs can be expanded and automatic retrieval and inserting installation can be linked online to fulfill the design of an automatic machine.
For mold close, the design of direct pressure integral mold-lock cylinder can lower the mold both in a high speed and a low speed. It therefore can lengthen the life of the mold.
For injection, the two-cylinder balanced injection system can make a smooth and powerful injection. Electronically controlled automatic fault display is used to make easy troubleshooting and maintenance.

YH-1S
In YH-V Series models, we install a single sliding to let the machine complete a cycle. After mold opened, the lower mold will slip to the front of an operator to make easier and safer operation. In addition, the finished products are ejected externally.
With multi-stage temperature control, multi-stage injection pressure, injection speed, injection back pressure non-stage adjustments make it possible to the molding of various precise plastic parts. (Engineering Plastics)
Big L / D ratio of screw, more suitable for special engineering plastics.It can expand computer programs and make an automatic takeout. The embedded devices can be connected to achieve the design of an automatic machine.
For mold close, the design of direct pressure integral mold-lock cylinder can lower the mold both in a high speed and a low speed. It therefore can lengthen the life of the mold.
For injection, the two-cylinder balanced injection system can make a smooth and powerful injection. Electronically controlled automatic fault display is used to make easy troubleshooting and maintenance.

YH-2S
In YH-V Series models, we install dual sliding (alternating dual sliding). One mold is for injection molding, the other mold is externally to pick up pieces and do insert work. It works safely and efficiently. Fast mold-lock and mold closed at a low pressure and a low speed. When it comes to an abnormal mold-lock, the mold will open automatically for safety sake. Such a design can protect mold. Big L / D ratio of screw is more suitable for special engineering plastics.
With multi-stage temperature control, multi-stage injection pressure, injection speed, injection back pressure non-stage adjustment makes it possible to the molding of various precise plastic parts. (Engineering Plastics)
It can expand computer programs and make an automatic takeout. The embedded devices can be connected to achieve the design of an automatic machine.
For mold close, the design of direct pressure integral mold-lock cylinder can lower the mold both in a high speed and a low speed. It therefore can lengthen the life of the mold.
For injection, the two-cylinder balanced injection system can make a smooth and powerful injection.Electronically controlled automatic fault display is used to make easy troubleshooting and maintenance.

YH-VR
Disc will make 180 °rotations alternately and go back and forth horizontally, enabling the operator to pick up pieces and insert pieces at a fixed operation to make the job easy and highly efficient.
The positioning of disc surface can be locked with a fixing pin to ensure a highly precise positioning when the rotation of the disc stops. Consequently, the upper and lower molds can be precisely closed.
It can be equipped with automatic insertion and automated removal devices to achieve a full automatic operation of the machine.
Standard disc contains two stations. For special needs, over 3 stations or 4 stations can be chosen for more convenient operation and automation of on-line planning, which can increase production capacity.
Standard disc is a vertical three-column direct pressure clamping. For special needs of mold, it can be four-column direct pressure clamping.

Vertical Clamping Vertical Injection

 Manufacturer Introduce

Supplier:

Yuh-Dak Machinery Co. Ltd.

Main Product:

Injection molding machines,vertical injection molding machine,plastic injection molding machines, two-color injection molding machine, plastic injection, injection molding

Country:

Taiwan

Address:

No.1,Aly. 42,Ln. 392,Fude 1st Rd.,Xizhi Dist.,Xinbei City 221,Taiwan (R.O.C.)

Tel:

886-2-26946450-3

Fax:

886-2-26946454
 Related Products