PET Preform Injection Molding Machine

Preform Injection Machine

Model No:


Application Vehicle:

FT-P Series - PET Preform Injection Molding Machine : FT-180P,FT-220LP

Products Name: PET Preform Injection Molding Machine

Features Specifications:


PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others.

Machine and Accessories:

● Dehumidifying dryer and auto loader system for material.
● Environment dehumidifying dryer system.
● Chiller system.
● Mold and hot runner temperature controller system.
● Automatic system.

Machine Features:

● Special injection construction designed to benefit for plasticizing.
● By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
● By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
● Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
● Shut-down memory is able to store up to 100 preset mold data memory.
● Higher stability and lower defect in PET preform dimension.

The following specifications are for your reference only and can not be used as the machine acceptance criteria. Please contact with our sales representatives to confirm the most appropriate machine features.

Item Unit FT-180P FT-220LP
Injection Unit
Screw Diameter mm 52 68
Injection Pressure kg/cm² 1747 1514
Theoretical Shot Volume cm³ 445.7 908
Shot Weight of Injection grams 507 1032
ozs 17.8 36.3
Injection Rate cm³/sec 185.7 340.3
Clamping Unit
Clamping Force metric tons 180 220
Clamping Strokes mm 420 450
Mold Thickness mm 120-560 220-650
Suggested Min. Mold Dim. (HxV) mm 300 x 257 340 x 300
Distance between Tie Bars (HxV) mm 460 x 420 520 x 460
Mold Platen (HxV) mm 725 x 685 800 x 740
Ejector Stroke mm 145 160
Electrical Equipment
Pump Driving Motor HP(kW) 30(22.38) 50(37.3)
Temperature Controller (range)set (0-400°C)
Heater Capacity kw 16.1 27.6
Machine Dimensions (LxWxH) mm 6150 x 1300 x 2225 6500 x 1400 x 2300
Oil Tank Capacity liter 350 510
Machine Weight metric tons 7.6 12
Pump Pressure kg/cm² 140 140

*Due to continuous improvements, we reserve the right to amend the above specifications without prior notice.

 Manufacturer Introduce



Main Product:

Toggle Type Injection Molding Machine,Direct Hydraulic Clamp Injection Molding Machine,Horizontal Injection Molding Machine,Thermoset Injection Molding Machine,Two-color Injection Molding Machine,Multi-color Injection Molding Machine,Preform Injection Mol




No.121 Bay Tow,Bay-Tow Village,Kwang-Meow Hsiang,Tainan County,Taiwan.(Shixia Administration District,Dalang Town,Dongguan City,Guangdong Province,China.)


886-6-5950688 86-769-83313753 86-574-56138688


886-6-5951120 86-769-83181903 86-574-56138699
 Related Products